THE 20-MINUTE MIX CHECKLIST (free, printable) 1. Levels: no channel clipping. Peaks under -6 dB during the mix. 2. High-pass anything that does not need low end (with a gentle slope). 3. Carve space: cut ~3 dB from competing sounds rather than boosting everything. 4. Vocals lead: make the vocal intelligible at low volume before adding effects. 5. Compress with intent: 2-4 dB of gain reduction, not 10. 6. Reverb on a send, not inserted on every track. 7. Check in mono. If it disappears, panning is doing too much work. 8. Reference a commercial track in your genre at matched loudness. 9. Check on headphones, phone speaker, and car if you can. 10. Master gently: meter first, small EQ moves, limiter last, avoid distortion. 11. Loudness: around -14 LUFS integrated is a safe streaming target, not a law. 12. Take a 10-minute break, then listen again at a low volume. Free tools that cover most of this: your DAW's stock EQ/compressor, Voxengo SPAN (spectrum), Youlean Loudness Meter (free version), and a decent limiter. No paid plugin is required to make a release-ready mix.